Du besöker nu vår svenska webbplats, vill du byta språk som webbsidan visas på?
Byt språk
Forging billets - stock program
Den här sidan finns enbart på Engelska (This page is only available in English)
Our forging billet stock covers the following grades of stainless steels, duplex stainless steels and nickel alloys.
| Alleima grade | UNS | ASTM | EN steel no. |
|---|---|---|---|
| Sanmac SAF 2205 | S31803 / S32205 | - | 1.4462 |
| SAF 2507 | S32750 | - | 1.4410 |
| Alleima® 254 SMO ESR* | S31254 | - | 1.4547 |
| Sanicro 31HT | N08810 / N08811 | Alloy 800 HT | 1.4959 |
| Sanicro 32Cu | N08020 | Alloy 20 | - |
| Sanicro 41Cu | N08825 | Alloy 825 | 2.4858 |
* ESR = Electroslag remelted
| Square billets all grades*, mm (in.) |
Round billets 254 SMO, mm (in.) |
|---|---|
| 80 (3.15) | 75 (2.95) |
| 100 (3.94) | 100 (3.94) |
| 125 (4.92) | 150 (5.90) |
| 195 (7.68) | 180 (7.09) |
| 250 (9.84) | 200 (7.87) |
| 350 (13.78) | 250 (9.84) |
| 300 (11.81) | |
| 350 (13.78) |
* All grades except 254 SMO
Lengths
Billets for forging are delivered in lengths of 3-5.8 m (9.8-19 ft).
Surface condition
- Square billets: fully ground
- Round billets: peel turned