TRI-2-SOD is a magnet wire class H modified polyester resin insulation. It has excellent thermal endurance, solvent resistance and exhibits a low coefficient of friction to improve windability.
Typical applications are within appliance and tool motors, continuous operation coils, subfractional instrument and servo motors solenoids. speaker voice coils.
Electrical properties
| Property | NEMA MW 1000 | ASTM D1696 | IEC 851 | JIS C 3003 | |
|---|---|---|---|---|---|
| Dielectric strength at 25°C (77°F) | 3.8.1.1 | 69-75 | 13-4.2, 3, 4 | 11.1 | 14.0 kV |
| Dissipation factor at 220°C (428°F) | 107-114 | 0.05 |
Mechanical properties
| Property | NEMA MW-1000 | ASTM D1696 | IEC 851 | JIS C 3003 | |
|---|---|---|---|---|---|
| Adherence and flexibility no snap 20% snap |
3.3.1.1 3.3.1.1 |
141-148 141-148 |
8-5.1.1 |
8.1 9.1 |
Pass 1d Pass 1d |
| % elongation at break | 3.4.1.1 | 122-129 | 6-3.0 | 38 | |
| Mandrel at break | 3.4.1.1 | 122-129 | Pass 1d | ||
| Cut through temperature | 3.50.1.1 | 61-68 | 306°C (583°F) | ||
| Heat shock 20% stretch - ½ h at 200°C (392°F) |
3.5.1.1 |
156-162 |
9-3.1 |
14.1 |
Pass 3d |
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Alleima materials.