Den här sidan finns enbart på Engelska (This page is only available in English)

Event details

When
Tuesday to Sunday, March 3 to March 7, 2024

Where
New Orleans Ernest N. Morial Convention Center,
900 Convention Center Blvd
New Orleans, LA 70130

Booth
845

Join us at AMPP Annual Conference + Expo 2024!

We are excited to have our team of materials experts be at the upcoming AMPP Annual Conference + Expo in New Orleans in March 2024. Set to be the largest corrosion and protective coatings event of the year, we look forward to a week-long of enriching discussions and learnings at both the conference and exhibition floor.

We will be introducing our new advanced super duplex tube, tailored for the most acidic environments. Want to know more? Visit our booth 845.

We look forward to meeting you there!

Event Details:

  • When: March 3 to 7, 2024
  • Where: New Orleans Ernest N. Morial Convention Center, New Orleans, Louisiana
  • Alleima booth: Booth 845

Born from a rich heritage of innovation, Alleima is a leading manufacturer of high-value-added products in advanced stainless steels, special alloys, and industrial heating products. Alleima has been providing trusted solutions for the energy industry for over 50 years, and our global track record proves our commitment to customers locally, regionally and globally.

We put our customers at the heart of everything we do, constantly pushing boundaries and striving for the best with our Unbreakable Promise.

  • When: March 3 to 7, 2024
  • Where: New Orleans Ernest N. Morial Convention Center, New Orleans, Louisiana
  • Alleima booth: Booth 845

Meet our experts on-site, who will also be presenting their papers at the conference!

Event registration

Register for AMPP Annual Conference + EXPO 2024

Fill out the form to schedule a meeting with one of our experts

Meet our experts on-site

Johan Salwén
Technical Marketing Specialist, Tube EMEA

Choosing the Right Material for Hydraulic and Instrumentation Systems In Marine Environments – Results From Field Testing
The paper presents field testing comparing various materials for corrosive marine environments to assist industries in selecting the appropriate material. It highlights UNS N08935 as a cost-effective solution, reducing capital costs while maintaining corrosion resistance and extending the lifecycle. Additionally, it discusses the newly developed grade UNS N08935, a super austenitic alloy, which provides a balance between stainless steel and expensive high nickel alloys.
- March 4, 2024 at 1:10pm CST in Room R07

Karen Picker
Technical Marketing Manager, Tube Americas

Comparison Of The Life Cycle Cost Of Carbon Steel, Duplex Stainless Steels, Super Austenitic, And Nickel-Based Alloys For Crude Unit Overhead Condensers
A refinery in the U.S. Gulf Coast faced severe corrosion issues with carbon steel tubes in its crude unit overhead condensers, resulting in premature failure within six months. The tubes were subsequently upgraded to super duplex and hyper duplex stainless steel, extending service life to 12 months and two years respectively. Failure analysis revealed under-deposit corrosion, with preferential attack on the ferrite phase. An economical alternative, Sanicro 35 was suggested over nickel alloys 625 and C-276, based on material selection and life-cycle cost analysis.
- March 4, 2024 at 1:35pm CST in Room R07

Luiza Esteves
Technical Marketing Engineer, Tube Americas

Evaluation of Crevice Corrosion Resistance of Super Austenitic Sanicro 35® (UNS N08935)
Alloy 35Mo (UNS N08935) is a newly developed super-austenitic alloy designed for use in corrosive environments. It exhibits excellent corrosion resistance in chloride-induced service and finds applications in various industries. The objective of the study is to compare the critical crevice corrosion temperature (CCT) of alloy 35Mo with other alloys (UNS S31254, UNS N08367, UNS N10276) in a potentiostatic test using 1 M NaCl, following ASTM G150 standards.
- March 7, 2024 at 11:25am CST in Room 229

Oscar Öhlin
R&D Engineer

Corrosion Properties of UNS S83071 in Acid and Caustic Environments
UNS S83071 is a newly developed super duplex stainless steel optimized for general corrosion resistance with a composition of 30Cr-7Ni-3.5Mo-N. New data presented in the paper focuses on general corrosion testing in various acid and caustic environments such as formic acid, nitric acid, phosphoric acid, and sodium hydroxide. Results demonstrate the steel's excellent resistance to both acid and caustic general corrosion, making it suitable for use in corrosive environments within the chemical industry. The data provided can aid in material selection for applications like heat exchangers or equipment in acid or caustic production plants.
-
March 7, 2024 at 1:35pm CST in Room 229

900 alloys pushing sustainability

900 alloys pushing sustainability

Choosing the right material can advance the life of your heat exchanger

Choosing the right material can advance the life of your heat exchanger